Electric Stacker – Heavy-Duty Warehouse Lifting Solution

Electric Stacker – Heavy-Duty Warehouse Lifting Solution

This electric stacker delivers a rated load capacity of 1000kg to 1500kg at 600mm load center, with a maximum lifting height of 3000mm and a compact turning radius of 1400mm.Engineered with a fully integrated one-piece body and automatic welding technology, the unit features a 90mm reinforced steel fork carriage, SEGA intelligent ergonomic handle with butterfly switch acceleration control, and maintenance-free polyurethane silent wheels.The 0.75kW drive motor and 2.2kW lift motor enable 4.0 km/h travel speed under loaded conditions, while the 24V/100Ah battery system supports extended shift operations.

Integrated One-Piece Body Construction

The entire chassis employs full-vehicle integrated welding technology. This continuous one-piece forming process eliminates weak points found in bolted or partial-weld assemblies.All welded joints are produced via robotic gas-shielded automatic welding, achieving consistent penetration depth and a smooth, uniform bead profile without spatter or undercut defects.The integrated design enhances overall safety and extends service life in high-traffic warehouse environments.

SEGA Intelligent Ergonomic Control System

The proprietary SEGA electronic system integrates proportional valve control, regenerative braking, and load-sensing hydraulics within a sealed IP54-rated controller housing.The tiller handle is ergonomically contoured with a die-cast aluminum grip, featuring a butterfly-type thumb-operated accelerator switch that provides proportional speed modulation from 0 to 6.0 km/h.This single-hand operation design improves productivity during repeated stacking cycles while maintaining precise load positioning.The control interface includes a digital display panel showing real-time battery status, hour meter, and fault diagnostics.

One-Piece Fork Arm – 90mm Reinforced Steel

The fork arm is fabricated from a single piece of 90mm thick high-carbon steel, hot-rolled and precision-machined to eliminate seams between the blade and the shank.This seamless integration prevents debris accumulation and reduces stress concentration points that typically lead to metal fatigue in sectional designs.The fork surface is induction-hardened to 45–48 HRC, providing superior abrasion resistance.With an effective fork length of 1150mm and adjustable width range of 200–685mm, the unit accommodates standard European and American pallet dimensions without auxiliary attachments.

Polyurethane Silent Wheels – Floor-Friendly Mobility

Equipped with solid polyurethane (PU) wheels, this stacker delivers quiet, non-marking operation suitable for epoxy-coated, polished concrete, and other sensitive floor surfaces.PU wheels provide excellent abrasion resistance, high load-bearing capacity, and low rolling resistance.The non-marking compound prevents floor staining and surface damage, while the solid construction eliminates pneumatic maintenance and puncture risks.Noise reduction is a key benefit, with operating levels below 70 dB, making this stacker ideal for noise-sensitive facilities.

Emergency Power-Off Safety System

A prominently positioned red emergency power-off switch ensures immediate shutdown capability during operation.The emergency disconnect guarantees safety during travel, providing operators with full control authority and significantly increasing the overall safety coefficient of the vehicle.

Technical Specifications

Mast Options (Duplex)

Smart Features & Safety Systems

Automatic low-voltage protection disables lift functions and reduces travel speed when battery charge drops below 20%.Electromagnetic braking provides instant response for enhanced stopping power.The heavy-duty transmission chain ensures stable, safe elevation.A manual descent emergency valve is provided for power failure scenarios, enabling controlled lowering without electrical input.