Manual Pallet Truck – Reinforced Structure with Wear-Resistant Bronze Bushings

Manual Pallet Truck – Reinforced Structure with Wear-Resistant Bronze Bushings

This manual pallet truck combines high-strength cast steel frames, adjustable push rods with 1.5mm tin bronze bushings, and wear-resistant coatings on all critical connection points. Available in 2000kg, 2500kg, and 3000kg load capacities, with fork widths of 550mm or 685mm, and fork lengths of 1150mm or 1220mm. Minimum fork height is 85mm, lift height reaches 195mm, and turning radius ranges from 1380mm to 1450mm depending on configuration. Self-weight varies between 65.9kg and 83kg based on wheel material (PU or nylon).

Key Design Features for Extended Service Life

The adjustable push rod is equipped with a 1.5mm thick tin bronze sleeve combined with a耐磨涂层 (wear-resistant coating) to reduce friction and significantly prolong component life. All four push rod connection holes and eight wheel frame connection holes are fitted with the same 1.5mm tin bronze bushings – 12 pieces in total – each coated for extra durability. The high-strength cast steel wheel frame uses brass bushings with a wear-resistant layer on all vulnerable parts, ensuring smooth operation under continuous heavy use.

Technical Specifications – Detailed Parameter Table

Wheel and Clearance Data

Steering wheel: 180×50 mm. Load wheel: 80×70 mm. Minimum fork height (h) is 85 mm, lifted height (H1) is 110 mm, and maximum lift height reaches 195 mm. Overall truck height (h2) is 1215 mm. Single fork width (e) is 160 mm, fork thickness (s) is 51 mm. Ground clearance at wheelbase center (m) is 30 mm.

Durability Upgrades on High-Wear Points

The wheel frame is made of high-strength cast steel. All brass bushings at wear-prone joints are factory-coated with a耐磨涂层 to reduce metal-to-metal contact. The push rod connection area incorporates four reinforced holes, while the wheel assembly uses eight connection holes – each fitted with a 1.5mm tin bronze sleeve. This design distributes load evenly and lowers maintenance frequency.

Reliable Performance for Daily Warehouse Operations

With two wheel options (PU and nylon), the truck adapts to different floor conditions. PU wheels provide smoother rolling and lower noise, while nylon wheels offer higher resistance to wear on rough surfaces. All models comply with standard manual handling equipment requirements, ensuring safe operation under rated loads.